Jig and shaking table belong to the re-election equipment, and the application surface is very wide, but jig and shaking table in the applicability, capacity, recovery and other aspects of beneficiation indicators are very different, here for the capacity, recovery, applicability of the three aspects of the details of the differences between the two types of equipment.

1, processing capacity

Processing capacity in mineral processing operations is an important indicator, so we first for this indicator of the two types of equipment for a simple comparison. Jig is the use of water as a medium, in the jigging chamber for mineral sorting, the theory of sorting is stratified according to the specific gravity, jig has a large capacity, small jigger capacity up to 2-6T / h, and large mining diaphragm jigger capacity has reached 40T / h, in the treatment of alluvial gold can also be increased to 60-80T capacity. And shaking table as a kind of selective equipment has a smaller processing capacity, it is understood that the processing capacity of shaking table is generally 2-3T/h.

2, recovery rate

The recovery rate of mineral processing is also an important indicator of mineral processing, so how about the recovery rate of jigger and shaking table? Below we explain this issue. Jig can be used as roughing equipment, can also be used as selecting equipment, in the selection of alluvial gold, jig recovery can generally reach more than 92%, and sawtooth wave jigger as a selecting equipment recovery is as high as 97%. Shaking table as roughing equipment when the handling capacity is small, the equipment covers a large area, so rarely used for roughing, but as a selection equipment. The recovery of alluvial gold in shaking table selection is generally about 90%, and the recovery rate can reach 92% or even better if adjusted properly. Therefore, in the recovery rate of this indicator jigger slightly better than shaking table.

3, applicability

Jig machine equipment is widely used in hematite, limonite, goethite, manganese, mercury, antimony, alluvial gold, alluvial tin, barite, lapis lazuli, fluorite ore and other metal and non-metallic minerals beneficiation, shaking table is suitable for a variety of minerals gravity separation, the difference is that the shaking table applies to the separation of fine-grained as well as micro-fine-grained minerals, the effect of the coarse-grained minerals is not good, and the jigger applies to coarse, medium and fine-grained minerals separation, and jigging machine is suitable for coarse, medium and fine-grained minerals. The difference is that shaking table is suitable for the separation of fine and micro-fine-grained minerals, and the effect is not good for the separation of coarse-grained minerals, while jigger is suitable for the separation of coarse, medium and fine-grained minerals, and the effect is not good for the separation of micro-fine-grained minerals, therefore, in the applicability of this index, shaking table is basically equal to jigger.