For the aspect of nursing:

The first point is that the rotating gears of the jigger keep making impact noises during the working period.

The second point is to check the wheel hoop on the machine every once in a while.

The third point, observe whether each part of the jigger can work normally.

The fourth point, observe the position of the parts of the machine from time to time and replace those damaged parts.

The fifth point, clean the dust on the plane of the machine's base frame to prevent the presentation of accidents.

The sixth point, if the bearing is abnormal, repair it immediately. Then it should be solved quickly.

Seventh point. Frequently wipe the oil to the equipment, the bearings of the jigger, the important parts of the machine, can affect the working life of the machine. Therefore, the bearing position should be frequently oiled, so that it insists on holding a clean state, in addition, the airtight performance should be good.

Assembly, care jigger know-how. The jigger is an auxiliary machine for mineral processing, the third point. The fourth point. It plays a huge role. Therefore, for the assembly and caring aspect of the jigger, the user also pays more attention to the

For the assembly aspect:

Point yi, when assembling the jigger, you need to put the machine on a flat, smooth concrete surface, and then take the ground bolt to tie the machine's several legs, so that it will not sway back and forth.

The second point is that the main parts of the machine should form a 90-degree angle with the horizontal ground.

After the assembly is completed, you also need to check the screws of each part of the machine to see if there is any loose host hatch or something is not closed tightly ah and so on to try to jigger the power cord and switch whether there is a problem.