Jigger is a mineral processing equipment for separating metal minerals. Due to its excellent performance characteristics, it is unanimously recognised by many users. You should know that there are many factors affecting the washing effect of jigger, such as the amount of feed, emissions and so on. To explain to you is another influence factor, the influence of jigger screen plate angle on the washing effect.

Jig machine reelection of alluvial gold ore can reduce the cost price of alluvial gold ore beneficiation, alluvial gold ore is natural gold with high gold content. However, due to the different states of the existence of alluvial gold and the minerals contained, the beneficiation methods used are different. The use of jigger to reclassify alluvial gold ore can reduce the cost price of alluvial gold ore beneficiation.

The angle of the screen plate of the jigger is the main parameter that affects the washing effect, the angle of the small bed moving speed slows down and is conducive to stratification, but too small will not only make the processing capacity decline, but also make the small particle size coal in the process of interference settling into the gangue layer appears to run coal phenomenon. In addition, if the gangue content in the incoming material is large, the angle of the screen plate is required to increase. We through the test and analogy analysis, in the hydraulic dynamic screen jigger in the screen angle should not be less than 5 degrees, in our design to take 7 ~ 10 degrees, the specific value according to the lower limit of the wash feed particle size to take the value of production.