Selection of iron separator must also consider the iron content of the material, iron removal requirements, the use of the environment and the characteristics of the iron separator itself.The following briefly introduces the precautions to you.

1, when the material contains more iron, should be used with continuous iron discharge capacity of self-unloading electromagnetic, permanent magnetic separator.

2, when the material contains less iron, it is appropriate to use artificial unloading type electromagnetic, permanent magnet separator.Appropriately reduce the suspension height, is conducive to iron removal.

3, when the material contains very little iron, should be selected GJT series metal detector and strong excitation self-unloading electromagnetic separator used in conjunction with power saving and energy saving, iron removal effect is good.

4, when the power capacity is limited, should be used permanent magnetic separator.

5, when the use of the environment is more serious dust, should be used in a fully closed structure of the separator, such as RCDB, RCDD and other series of electromagnetic separator or RCYB, RCYD and other series of permanent magnet separator

6, in addition to the iron installed in the head of the belt conveyor, because the material has a forward impulse and is in a loose shape is conducive to iron removal, but in addition to the iron at the bottom of the active wheel should be non-ferromagnetic materials.

7, in addition to the iron installed in the middle of the belt machine (i.e., cross-arrangement), in order to improve the effect of iron removal, can be installed under the belt WCG series of non-magnetic rollers.

8, for the removal of iron can not be adsorbed non-ferromagnetic metal materials, it is appropriate to use the GJT series of metal detector, alarm detection and shutdown manually selected.

9, in addition to the iron suction iron has the following characteristics: suction large long easy to small short; suction tip easy to ball; suction dynamic easy to static, in addition to the iron requirements of the occasion, in addition to the iron should be appropriate to improve the specifications or the use of multi-stage in addition to iron.

10, the use of multi-stage iron removal, after the level of iron removal suction should be greater than the former level of iron removal suction, otherwise the iron removal effect will be very poor after the level.