The maintenance of the machine is an important regular work, it should be closely co-ordinated with the operation and maintenance, etc., there should be a full-time staff to carry out on-duty inspection. 1, the equipment should be installed on a horizontal concrete foundation, fixed with ground bolts.

2, the installation should pay attention to the main body and the horizontal vertical.

3、After installation, check whether the bolts of each part are loose and whether the main engine hatch is fastened, if so, please fasten.

4、Configure the power line and control switch according to the power of the equipment.

5、Checking is completed, empty load test run, test run can be normal production. 1, bearings bear all the load of the machine, so good lubrication on the bearing life has a great relationship, it directly affects the service life of the machine and the operating rate, thus requiring the injection of lubricant must be clean, the seal must be good, the machine's main injection of oil (1) rotating bearings (2) roller bearings (3) all gears (4) movable bearings, sliding surfaces.

2, the new installation of the wheel hoop is prone to loosening must be checked frequently.

3, pay attention to all parts of the machine is working properly.

4, pay attention to check the degree of wear and tear parts, pay attention to the replacement of worn parts at any time.

5, put the movable device of the base frame plane, should be out of dust and other things so as not to meet the machine can not be crushed materials when the movable bearings can not move on the base frame, resulting in serious accidents.

6, bearing oil temperature rises, should immediately stop to check the cause to eliminate.

7, rotating gears in operation if there is a shock sound should be stopped immediately to check and eliminate