For the operation of jigging machine, many customers do not know very well, the operation of jigging machine, mainly to have this very good rich, accurate basic knowledge and skilled operating techniques, two aspects. To operate the jigger, you must have a detailed understanding and mastery of how the jigger operates in the process, the factors affecting the jigger sorting effect, the mechanical structure and the role of each component, as well as the jigger sorting effect of the evaluation and identification, and so on. Jigger start the general principle is: start to reverse start, the so-called reverse start is from the back of the process forward one by one to start, stop to stop in the right direction, the purpose of doing so in order to be able to work normally, such as not so, will produce a material pile-up, will cause mechanical accidents or production accidents in this regard.

After the normal start up of machinery, jigger in the material before the first chamber of the water and flush roughly given, the second step to add material, the third step to add wind, are given to the top after the inspection of the bed loose situation, according to the specific circumstances of the adjustment of the wind, the amount of water, so that the entire bed in the appropriate loose state, you can be the wind, the water and the discharge system to stabilise roughly, and then according to the actual indicators of the situation for fine-tuning. Influence jigger operation of many factors, and beneficiation effect is not very good nor very bad, is the result of the combined effect of many factors. Operators should know and understand clearly, to achieve what kind of product index is satisfactory index. In this general goal, the effect of those mineral processing has an impact, but can not be adjusted at any time to understand the factors and adjust to the appropriate level.