Correct use and maintenance of mineral processing equipment is to give full play to the premise of the effect of the use of equipment, improve the stability and reliability of the equipment has been to extend the life of the equipment is a prerequisite for the operation of mineral processing equipment on-site workers should be strictly in accordance with the provisions of the operating specification of the equipment book, according to the requirements of the start-up and shutdown have been

　　The maintenance and overhaul work of the equipment.

　　In the operation of the equipment, the site operators should carry out the following checks before working on the equipment, the following is a common daily check of the equipment:

1. Daily inspection of the equipment cable, whether there is a rupture, damage and other phenomena

2. Connect the various parts of the equipment whether there are lost and damaged

3. Check whether there are foreign objects between the equipment, large particles on the equipment to cause certain damage

4. Check whether the roller of the equipment can rotate freely.

5. Whether the hydraulic oil is in place, can complete the daily lubrication of equipment

6. Whether the wiring phase of the equipment motor is correct to ensure normal operation, if there are abnormalities should be immediately shut down to deal with, correct the phase of the normal connection